Solar Pumps
Highly energy efficient submersible solar water pump with energy efficient inverter duty motor.
High efficiency solar photovoltaic panels with a service life of minimum 20 years.
Robust design Galvanized steel mounting structure for long life.
Highly efficient controller with a conversion efficiency of 98%.
The controller is tropicalized to operate satisfactorily with an ambient temperature of up to 50°C.
Virtually no maintenance cost.
Mini Pumps
Pump casings, Adaptor, Stator body, Endshield is made of close grained Cast Iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.
High tensile brass impeller is used to give trouble free service.
Self Priming capacity of pumps upto 6 meters.
The laminations are non-oriented silicon steel & confirms to IS-648.
Motor windings are vacuum impregnated with synthetic varnish for better moisture resistance.
Superior mechanical shaft seal for longer life and effective sealing against water leakage.
The pressure die cast rotor runs on two genuine sealed ball bearings.
Grease lubricated anti-friction ball bearings are fitted at both ends to withstand radial and axial loads.
Better insulating materials are used so that pumpset can withstand high temperature rise.
Borewell Submersible
All pumps feature complete fabricated stainless steel AISI 304 construction.
All pumps are equipped with water lubricated rubber wear rings and bush bearings to work well with sand, found in well water.
These pumps offers higher pumping efficiency due to state-of the-art computerized hydraulic design and usage of stainless steel sheet metal which offers a very low co-efficient of friction.
This significantly reduces energy consumption.
These pump can withstand harsh, abrasive and corrosive environment due to their construction in high grade AISI 304 stainless steel.
All pumps are equipped with reliable non-return valve to prevent back flow and reduces water hammer when the pump is stopped.
Insulation Class is F (Oil filled motors)
Openwell Submersible
Pumpset are designed to withstand voltage drops to 320 volts.
It has well designed sleeve and thrust bearing of adequate capacity for longer life.
High operating efficiencies of pumpset result into high water discharge rate and lower power bills.
All components are precisely machined on modern precision machine tools to give you years of reliable operation.
Stator and rotor of the monoset are vacuum impregnated with synthetic varnish and epoxy coated for corrosion resistance.
All rotating components are dynamically balanced to ensure long bearing life and vibration free smooth operation.
Monoblocks
The laminations are non-oriented silicon steel & confirms to IS-648.
Volute, Impeller, Adaptor, Stator body, Endshield is made of close grained cast iron of high tensile strength.
It has a very smooth surface finish resulting in low friction losses.
Motor windings are vacuum impregnated with synthetic varnish for better moisture resistance.
Superior mechanical shaft seal for longer life and effective sealing against water leakage.
The electric rotor is pressure die cast & uses electric grade aluminium.
Grease Lubricated anti-friction ball bearings are fitted at both ends to withstand radial and axial loads.
Better insulating materials are used so that pumpset can with stand high temperature rise.
All components are manufactured from materials as per standard specification.
They are precisely machined on modern machine tools to give you years of reliable operation.
Pressure Boosters
These pumps are suitable for liquids which are potable & rain water other than thin, clean, non-aggressive, non-explosive, not containing solid particles or fibres.
Pumps are designed for liquid transfer & pressure boosting systems in:
Households
Commercial complexes
Gardens etc...
Agriculture
Horticulture
Small industries
Car washing
Cooling systems
Drawing water out a well.
Sewage Pumps
Slurry/Slushy water, waste water without solids, sump drainage.
Drainage application, flood control.
Dewatering for fish pond or basement.
Equipped with Automatic reset motor protector, prevents motor from burning due to high temperature/phase failure/ voltage drop and lock impeller.
Mud Pumps
Mud removal, Drainage application, flood control.
Dewatering mud from pond or water sources.
Equipped with Automatic reset motor protector, prevents motor from burning due to high temperature/phase failure/ voltage drop and lock impeller.